Parts for General Motors

Per page:  

SKU: 1528533
Bumper, Fender Liner, Cowl, Grille, Quarter/Rocker Panel, Wheel Liner and Upper Deflector Push-Type Retainer with Sealer for GM (Pack of 25)

SKU: 1548753
Door Lock Rod Clip - 3/16" Rod Size; Black Nylon; Used on Left-Hand Side

SKU: P24210
Radiator Air Baffle and Door Trim Retainer - Fits 8mm Hole; 19mm Head Diameter; 11mm Stem Length; 24mm Overall Length; Black Plastic

SKU: 1564469
Weatherstrip Retainer - 5mm x 15mm Head Size; Fits 5mm Hole; 10mm Stem Length; Green Nylon

SKU: 1625701
Door Trim Applique Clip (Pack of 50)

SKU: 1505975
Rocker Molding Clip with Sealer for GM, Nylon, White, Fits 9mm Hole, 12 x 20mm Top and Bottom Head, 16mm Stem Length (Pack of 10)

SKU: KT14387
License Plate Screw Grommet for GM, Nylon, Black, M6.3 Screw Size, 20 x 20mm Head, 14mm Stem Length (Pack of 50)

SKU: 1481977
Radiator Grille - Front End Panel Nut; Thread Size: M6-1.0; Overall Height: 11mm; Zinc Organic Finish (Pack of 10)

SKU: 1548752
Rivet; Diameter: 4mm (5/32"); Flange Diameter: 8mm (5/16"); Grip Range: 5mm - 12mm (.197" - .472"); Aluminum Rivet/Mandrel (Pack of 25)

SKU: 1500761
GM - Door Sill/Rocker Panel Moulding Retainer (Pack of 25)

SKU: 1564471
Front & Rear Bumper and Headlamp Assembly Specialty Push-In Nut; Thread Size: M6-1.0; Overall Height: 11.6mm; Zinc Organic (Pack of 10)

SKU: KL126
General Motors Body Hardware Assortment - 265 Pieces, 18 Items (Pack of 1)

SKU: 1500770
GM - Belt Moulding Clip (Pack of 15)

SKU: P85100
Hex Washer Head Body Bolt - M6-1.0 x 20mm; 10mm Across Flats; Grade 9.8; Black Polyseal Finish

SKU: 1493994
Clip-Door Panel  (Pack of 10)

SKU: KT14388
Tail Light Grommet with Sealer - Black Nylon; Fits Hole Size 11mm; 15mm Head Diameter; 17mm Stem Length  (Pack of 5)

SKU: P91130
Rear Bumper Pad Blind Rivet - 1/4" Diameter; 0.062" - 0.125" Grip Range; 1/2" Flange Diameter; Steel/Steel

SKU: P91128
Rocker Moulding, Spoiler, and Interior Roof Trim Retainer - Fits 9mm Hole; 42mm Overall Length; Yellow Plastic with Seal

SKU: P91127
Roof Rail Moulding Retainer - Fits 7mm Hole; Plastic with Seal

SKU: P91125
Rocker Moulding Retainer - Fits 10mm Hole; 12mm x 20mm Top Head Size; 15mm Stem Length; 21mm Overall Length; 4mm Panel Range; Plastic

SKU: P91121
Rear Bumper Fascia Specialty Rivet - 1/8" Diameter; 5/32" - 5/16" Grip Range; 1/4" Flange Diameter; Aluminum/Aluminum

SKU: P91113
Fender Apron and Radiator Baffle Retainer - 1" Head Diameter; 11/32" Stem Diameter; 3/4" Stem Length; Black Nylon

SKU: P86128
Front and Rear Bumper and Grille Fastener - Fits 11mm Hole; 11mm Stem Length; 15mm x 20mm Top Head Size; White Nylon

SKU: P86126
Cable Tie - Gray Nylon; 155mm Overall Length; 5mm Strap Width; 30mm Maximum Bundle Diameter; Fits 6.3mm Hole